Hotpoint EG1000EX Instructions Manual page 32

Installation
The cooker is designed to match the depth of standard 600mm worktops.
An adaptor backplate should, therefore, be fitted within the shaded area
shown to allow the cooker to be pushed fully to the wall. If a forward facing
backplate is used, it must be chased into the wall.
180
450
370
Connection to the cooker should be made with an approved appliance flexible
connection to BS 669. A length of 0.9 to 1.25m is recommended. The length
of hose chosen should be such that when the cooker is in situ, the hose does
not touch the floor.
The temperature rise of areas at the rear of the cooker that are likely to
come in
contact with the flexible hose do not exceed 70˚C.
LPG cookers should be connected with a hose suitable for LPG and capable of
withstanding 50mbar pressure.
32