Table of Contents
Advertisement
• Adjust the volume
CENTRE SPEAKER
• The central loudspeaker
• Adjust the volume
REAR SPEAKER
• The loudspeakers for the surrounding noise
• Adjust the volume
Subwoofer
• Adjust the volume
SPDIF SETUP
Set the digital audio signal.
• Select SPDIF OFF to switch off the digital audio signal output.
• Select SPDIF RAW to set the digital audio signal output to its raw
format (DTS/Dolby Digital 5.1).
• Select SPDIF PCM to set the digital audio signal output to PCM format.
EQUALISER
• EQ TYPE: select from the various sound effects
Bass boost
• Set the desired level
SUPER BASS
• Set the desired level
TREBLE BOOST
• Set the desired level
3D PROCESSING
• 3D processing creates a virtual sound experience for various audio
settings.
The DOLBY DIGITAL menu
Dolby digital audio setup
DUAL MONO
In the DUAL MONO area, you can choose:
• STEREO: for stereo effect.
• L-Mono: left channel only.
• R-Mono: right channel only.
• Mix-Mono: the average of both the left and right channel.
DYNAMIC
• Select the value for the dynamic range compression to avoid losing
sound details resulting from a low volume.
15
Advertisement
Table of Contents
