Video Mode; Power On The Camera; Power Off The Camera; Playback Mode - Hamilton/Buhl CAMERA-DC2 Instruction Manual

Hide thumbs Also See for CAMERA-DC2:
Table of Contents

Advertisement

Note: If you turn off the Auto Power Off mode, the camera will not turn off until the battery is completely
drained, or you manually turn off the camera.
Sound Effect: ON/OFF, set the option, you can turn ON/OFF the key sound.
Languages: English, Spanish, Portuguese, French, German, Italian, Russian, Traditional Chinese and
Simplified Chinese.
Frequency: There are 50Hz/60Hz options. The default setting is 50Hz.
Format: The function will format the SD memory card, and will remove all the files in memory,
including the protected file.
Default setting: Set the option, you can restore the factory settings on the camera.

Video Mode

Power on the camera, press the mode button to video mode, press shutter button to record the video, The
status led Flash in the recording video, press the shutter button again to stop recording the video.
Note: For recording videos, a Class 4 or higher speed card is needed.
Video size: the camera supports 2 video sizes - 1280x720 (720P) and 640x480 (VGA).

Playback Mode

Power on the camera. Press the playback button to activate playback mode.
Photos can be rotated, protected, deleted, and cropped.
Note: If there are no photo and/or video files, the LCD will display "No File Exist" message.
Press the playback button to return to the Photo mode or Video mode.
13

Power on the camera

Press the power button at the top of the camera to turn on the power. The LCD screen will be turned on
and the camera is ready to be used.

Power off the camera

If the camera is on, press the power button to turn off the camera.
When the power is low, the red battery
Within a few seconds, the camera will power off automatically. Be sure to charge the battery.
icon and the "low battery" message will appear on LCD.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc2

Table of Contents