Removal Of Major Parts - Sharp 61R-WP5H Service Manual

1. Detaching the chassis
1-1. Remove the twenty screws from the hard board at the back. Detach the hard board.
1-2. Remove the two screws from the back of the chassis and disconnect the connectors. Draw out the chassis.
(Place the connectors neatly on the circuit board.)
1-3. With the hard board removed, disconnect the connectors between the sub-power chassis and the main
chassis.
Sub-power chassis
1-3

REMOVAL OF MAJOR PARTS

Rear View
Hard board
1-1
∗
1-2
1-1
∗
17
61R-WP5H
55R-WP5H
Main chassis