Using The Video And Audio Input Jacks - Sharp 61R-WP5H Service Manual

61R-WP5H
55R-WP5H

Using the Video and Audio Input Jacks

Connecting video equipment for video playback
• When the television is connected to video equipment as shown below, the material being played back on the
video equipment can be seen on the television screen.
Connecting a video device equipped with a video output terminal
(Front terminals of Rear Projection TV)
IN 2
L-AUDIO-R
VIDEO S-VIDEO
or
• The S-VIDEO INPUT terminals offer a higher quality image by accepting the image signal separated into color
and brightness signals.
Note
• S-VIDEO INPUT terminals are for video signals only. The audio signals are connected to either IN 1 or IN 3
AUDIO terminals (left and right).
Signal
USE FOR HDTV SIGNALS ONLY.
NOT INTENDED FOR USE WITH COMPUTERS
HD INPUT IN 3
(USE FOR HDTV SIGNAL ONLY)
To HD INPUT
When noise or distortion appears on TV
caused by connecting a video game
machine, select the other setting of the
DDFC mode.
Signal
To AUDIO OUTPUT
To S-VIDEO OUTPUT
To VIDEO OUTPUT
(Rear terminals of Rear Projection TV)
ANT/CABLE 75
ANT-A
OUT
ANT-B
MONITOR OUT
Signal
(EXCEPT FOR HD AND
COMPONENT SIGNALS)
S-VIDEO
IN 1
COMPONENT
IN 3
Y P P
B R
IN 4
IN 5
CENTER IN VAO
R AUDIO L
Fasten with the screws
located at both ends.
VIDEO EQUIPMENTS
CAMCORDER
To AUDIO
OUTPUT (L/R)
Signal
To VIDEO OUTPUT
TO S-VIDEO OUTPUT
has an S-VIDEO output terminal).
R AUDIO L VIDEO
IN 1 IN 3
Signal
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
To VIDEO OUTPUT
Signal
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
R AUDIO L VIDEO
Signal
(To output terminals of DTV)
14
TV GAME
Video Equipment
(When your video equipment
Color Difference
Output Jack (Component )