2
Input: Linear*
2
Input: Linear*
decimal value
*1 Decimal output is applied when these formats cannot be output for
some reason.
*2 All calculations, including fractions and functions are input in a single
line. Same output format as that for models without Natural Textbook
Display (S-V.P.A.M. models, etc.)
Input/Output Format Display Examples
MathI/MathO
MathI/DecimalO
LineI/LineO
LineI/DecimalO
Note: The initial default input/output format setting is MathI/MathO.
Configuring the Calculator Setup
To change the calculator setup
1. Press (SETUP) to display the setup menu.
2. Use and to scroll the setup menu, and then input the number
displayed to the right
change.
Items and Available Setting Options
"◆" indicates the initial default setting.
Input/Output
LineI/DecimalO
formula input and calculation result output.
Angle Unit Degree
radian or gradian as the angle unit for value input and calculation result
display.
Number Format
result.
Fix: The value you specify (from 0 to 9) controls the number of decimal
places for displayed calculation results. Calculation results are rounded off
to the specified digit before being displayed.
; Output: Decimal or fraction
; Output: Converted to
*1
or left
MathI/MathO
Specifies the format to be used by the calculator for
◆
; Radian; Gradian
Specifies the number of digits for display of a calculation
(LineI/LineO)
(LineI/DecimalO)
*2
of the item whose setting you want to
*1 Language: Arabic *2 Language: English
◆
; MathI/DecimalO; LineI/LineO;
6
Specifies degree,