Epson Runsense User Manual page 45

Smartphone User's Guide
Measurement Settings (Meas. Settings)
Note:
Available settings may differ depending on the model you are using.
Setting items
AT Pause
Tap
(Only for the
measurement screen)
Screen
Activity Type
Interval
AT Lap
Changing the Settings
Value
ON
OFF (default)
Lap
Light
Screen Chg.
OFF (default)
Screen1
Screen2
Screen3
Screen4
Display Lap Screen
Run (default)
Walk
Bike
SETTING 01 to 03
SETTING 01 to 05
OFF (default)
Explanation
This function automatically stops measuring when you
stop running, and resumes when you continue running.
You can perform one of the functions specified in this
item by tapping the screen while measuring.
When Bike is selected as the Activity Type, the tap
function may operate automatically depending on the
condition of the road surface. If this occurs, we
recommend to change the setting to OFF.
You can display up to four measurement screens. You
can change the screen pattern and the measurement
items displayed for each screen.
You can also change the Display Lap Screen, but this is
not displayed for the interval function.
Set when running or jogging.
Set when walking.
Set when performing exercises that do not require you to
swing your arms, such as riding a bike.
Set the contents of high-intensity training (sprint) and
low-intensity training (recovery) and the number of
times they are repeated.
When a time or distance set in advance is reached, this
function records laps automatically.
Set the lap time or distance.
You can set five times or distances within the following
range.
Time: 01'00" to 60'00" (in increments of 1 minute)
Distance: 0.1 to 10.0 km (in increments of 0.1 km)
45