Table of Contents
Advertisement
TROUBLESHOOTING
TROUBLESHOOTING
POSSIBLE PROBLEM
Microwave oven
interfering with
radio, TV or similar
equipment.
Dim microwave
oven light.
Steam accumulating
on door and hot air
coming out from vents.
POSSIBLE PROBLEM
Microwave oven will
not start.
Microwave oven
does not heat.
Glass turntable makes
noise during operation.
LCD time digit shows
EA1A then V1:00 or
similar information
then goes to default
mode.
LCD time digit shows
00 for a short period
of time then shows 1 or
0 and stays at 1 or 0.
EASY SOLUTION
•
Clean door and sealing surface of the oven.
•
Reorient the receiving antenna of radio or television.
•
Relocate the microwave oven with respect to the receiver.
•
Move the microwave oven away from the receiver.
•
Plug the microwave oven into a different outlet so that
microwave oven and receiver are on different branch circuits.
•
When operating on low power levels, the microwave oven light
may be dimmer.
•
During operation, steam may be produced. Most will exit
through the vents, however some may accumulate around the
oven door.
POSSIBLE REASON
•
Power cord not
plugged in properly or
switched on.
•
Fuse blown or circuit
breaker problem.
•
Trouble with outlet.
•
Door not closed
properly.
•
Turntable roller not
assembled properly or
needs to be cleaned.
•
Both A BIT MORE™
& SMART REHEAT
button are pressed at
the same time under
the default mode.
•
Both A BIT MORE™
& SMART REHEAT
button are pressed at
the same time under
the default mode.
EASY SOLUTION
•
Unplug, put the plug in again
and switch on.
•
Replace the fuse or reset circuit
breaker.
•
Have a professional check that
the outlet is not faulty.
•
Ensure door is shut properly.
•
Reset and clean if necessary.
•
No action required. This is
normal and LCD just shows
the model type and software
version.
•
If the LCD time digit stays at 0,
send the unit back to repair.
•
If LCD time digit stays at 1,
Press STOP/CLEAR to set the
unit back to default mode.
43
Hide quick links:
Advertisement
Table of Contents
