Using The Crisper Pan - Breville BMO700 Quick Touch Crisp Instruction Booklet

ASSEMBLING YOUR BREVILLE PRODUCT

USING THE CRISPER PAN

The crisper pan is ideal for crisping up items
that can become soggy from microwave
reheating such as pies, quiches and pizza and
has been optimised to work in conjunction
with the Smart Settings.
The crisper pan can be used in either the upper
or lower position depending on the size of the
food or how much browning is desired.
To reduce risk of injury, or damaging the
microwave oven, ensure the crisper pan is
placed securely in the centre of the turntable
in both the upper and lower position. Avoid
placing Pyrex, plates or serving ware on
the crisper pan as they may overheat and
become damaged.
10
CAUTION
Surfaces are hot during and after operation.
Ensure pan is placed securely in the centre of
the turntable. This accessory is only to be used
with BMO700.
WARNING
• To avoid an electrical circuit overload, it
is recommended that no other appliances
are plugged into the same circuit as your
microwave oven (or other products) when
it is in use.
• Do not install oven over a range cooktop or
other heat-producing appliances. If installed
near or over a heat source, the oven could be
damaged and the warranty would be void.
• Check the oven for any damage, such as
misaligned or bent door, damaged door
seals and sealing surface, broken or loose
door hinges and latches and dents inside
the cavity or on the door. If there is any
damage, do not operate the oven and
contact a Breville service centre.
• Do not immerse the microwave oven, power
cord or plug in water or any other liquid.