Using The Internet; Connecting To The Internet - Sharp Aquos LC-80UH30U Operation Manual

<<

Using the Internet

Connecting to the Internet

By connecting your TV to a broadband system, you can access the Internet from the TV.
You can enjoy a variety of streaming content and Internet applications.
It is necessary to configure the network settings in order to enjoy streaming content and
internet applications.
These settings can be configured from "HOME" > "Settings" > "Device" > "Network".
NOTE
To connect your TV to the Internet, you must have a broadband Internet connection.
If you do not have a broadband Internet connection, consult the store where you purchased
your TV or ask your Internet service provider or telephone company.
When an Internet connection is made, an Ethernet and wireless connection cannot be used
at the same time. Use only one of the connection types.
Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the
TV to your broadband router (commercially available).
ETHERNET
cable
Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use wireless setup to connect the access point and
TV.
PC
Broadband router
Modem
Internet
PC
Wireless LAN router/
access point
Modem
Internet
ENGLISH | FRANÇAIS | ESPAÑOL
NOTE
This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter
may result in radio communications that do not comply with regulations on radio
communications. Therefore, do not use a separate wireless LAN adapter.
A wireless LAN connection and performance cannot be guaranteed for all residential
environments. In the following cases, the wireless LAN signal may be poor or drop, or the
connection speed may become slower.
- When used in buildings made with concrete, reinforced steel, or metal
- When placed near objects that obstruct the signal
- When used with other wireless devices that emit the same frequency
- When used in the vicinity of microwave ovens and other devices that emit a magnetic
field, electrostatic charge, or electromagnetic interference
When there is significant interference in the 2.4-GHz frequency (such as from other
wireless LAN devices, Bluetooth® devices, 2.4-GHz cordless telephones, and microwave
ovens), it is recommended that you use a wireless LAN router/access point that supports
IEEE802.11ac (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see
the operation manual of your access point.
Operations cannot be guaranteed when used with access points that do not have Wi-Fi®
certification.
A wireless LAN router/access point is required to connect the TV to the Internet using a
wireless LAN. See the operation manual of your access point for setup.
If your access point is set to a stealth mode (that prevents detection by other devices), you
may not be able to establish a connection. In this case, disable the stealth mode on the
access point.
A stable connection speed is required to play back streaming content. Use an Ethernet
connection if the wireless LAN speed is unstable.
Before transferring to a third party or disposal, be sure to initialize the wireless LAN
settings.
Please follow the legislation in your country when using the wireless LAN outdoors.
If you have failed to connect to the Internet in the above operation, then an error message
will appear. In this case, press EXIT to exit from the connected TV feature to make changes
to the network settings.
If you still cannot connect to the Internet, please consult your Internet service provider or
telephone company.
You cannot configure the settings from "HOME" > "Settings" > "Device" > "Network" while
using an application. If you must configure your "Network" settings, press the EXIT key to
exit the function.
ENG 9­1
>>