Controlling Hdmi Equipment Using Link Operation - Sharp Aquos LC-80UH30U Operation Manual

<< Using LINK Operation

Controlling HDMI Equipment Using LINK Operation

What's LINK Operation?
Using the HDMI CEC (Consumer Electronics Control) protocol, with
LINK Operation you can interactively operate compatible system
equipment (Blu-ray disc equipment, AV amplifier, DVD).
By connecting LINK-compatible devices with HDMI-certified cables
to the TV, you can control a recorder or AV amplifier using the
remote control of the TV.
LINK Operation allows you to operate the HDMI-connected
equipment with one remote control.
NOTE
HDMI IN 1, 2, 3 and 4 terminals are all capable of receiving 4K60P
4:4:4 signals.
To receive 4K60P 4:4:4 signals, on the Devices menu, set the HDMI
type to "Full". (See page 4-1)
For connecting the TV to LINK-compatible equipment, use
commercially available cables.
Point the remote control toward the TV, not to connected HDMI
equipment.
Video noise may occur depending on the type of HDMI cable used.
Make sure to use an HDMI-certified cable.
Up to 3 pieces of HDMI recording equipment and one AV amplifier
can be connected using this system.
Connecting AQUOS
BD player via
LINK­compatible
audio system
HDMI­certified cable
AQUOS BD player
Connected LINK-compatible devices can be operated without changing
the settings of the remote control unit.
One Touch Play
While the TV is in standby mode, it automatically turns on and plays
back the image from the HDMI source.
Single remote control
The LINK Operation automatically recognizes the connected HDMI
device and you can control the TV and the devices as if using a universal
remote control.
Control the LINK-compatible audio system
Set the volume of LINK-compatible audio system.
HDMI­certified cable
Optical fiber cable
Back panel
LINK­compatible
horizontal inputs
audio system
ENG 7­5
ENGLISH | FRANÇAIS | ESPAÑOL
NOTE
If the equipment does not operate, turn on the equipment and select
the appropriate input source using
The LINK feature may not operate properly when an HDMI splitter or
AV selector unit is used. These devices may cause interruptions to
the image and/or sound.
NOTE
The above description is an example of the LINK Operation function.
Refer to this operation manual and the operation manual of the LINK-
compatible device to be used with this TV.
Example
Back panel
vertical inputs
>>
(Devices).