Magnavox NB500MG9 Owner's Manual page 50

Connections (cont'd)
1.
Connection to an Audio System
2-Channel Analog Audio Connection
stereo system
audio
this unit
AUDIO OUT
Digital Audio Connection
AV receiver/amplifi er
audio
digital audio coaxial cable
this unit
DIGITAL OUT (COAXIAL)
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC IN.
Then connect the AC cord to the AC outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
this unit
EN
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your
local store.
analog audio input jacks
AUDIO IN
R L
RCA audio cable
AUDIO
OUT
L
R
DIGITAL AUDIO INPUT
COAXIAL
digital audio coaxial input jack
Supplied cables used in this connection are as follows:
• AC cord x 1
AC outlet
AC 120V, 60 Hz
AC cord
Playback
2.
1
Press [ y STANDBY-ON]
2
Turn on the TV and select the
OPEN/
STANDBY-ON DISPLAY HDMI CLOSE
appropriate input on the TV to which
the unit is connected.
3
Press [OPEN / CLOSE A ] to open
the disc tray.
SEARCH CLEAR A-B
4
Place the disc on the disc tray with
its label side facing up.
OK
SUBTITLE AUDIO
MODE
5
Press [OPEN / CLOSE A ] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6
Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [K / L / s / B] to select the desired
item, then press [OK].
To pause playback:
Press [PAUSE F ].
To return to normal playback:
Press [PLAY B ].
To stop playback:
Press [STOP C ].
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray, then
remove the disc before turning off the unit.
Align the disc to the
disc tray guide.
EN