Jovy Systems® Limited
Install XY table
1- un-pack the XY table components from the cartoon
2- Insert the main two rail bars to the X and Y holder sliding block.
3- Connect the bars with the left and right fixtures.
4- Install the four legs to the fixture.
5- Insert the limit control rod as a final step.
System installation
Please make sure that the supply voltage accords with the rated voltage
on the system nameplate then connect the power cord.
Check whether all switches are turned off.
Connect the two thermocouples in the first and second thermocouple
female sockets ( 1 & 2 from right to left)
Insert the vacuum tube into suction pump nozzle
13