Jovy Systems® Limited
Initial set up
Package contents
Please check whether the following parts are included and intact.
Basic unit
Control box ----------------------- 1 pc.
Operation Manual--------------- 1 pc.
K-type thermo-couple---------- 2 pcs.
X-Y table--------------------------- 1 pc.
USB cable--------------------------1 pc.
4 upper heater reflectors -----4 pcs.
CD ---------------------------------1 pc.
- Jovy® PC Suite.
- RE-8500 Driver.
- Microsoft .NET Framework 3.5 Redistributable Package.
- Microsoft Visual C++ Runtime Redistributable.
- Softcopy of the User's Manual.
- Adobe Acrobat Reader.
Install the machine and adjust parts
Unwrap the packing of the machine.
Make sure whether the machine and parts are in good conditions.
Take out RE-8500 Basic Unit and put it on the horizontal worktable.
Take out RE-8500 control box and put it at the right side of the basic unit.
Connect the power cable of the control box.
Adjust the parts of the XY table and put it above the basic unit and the
control box.
12
----------------------- 1 pc.