Radio - Kenwood KDC-U563BT Instruction Manual

GETTING STARTED
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
TDF ALARM ON: Activates the alarm if you forget to detach the
faceplate when ACC is set to OFF. ;
OFF: Deactivates.
SOURCE SELECT
PANDORA SRC ON: Enables PANDORA in source selection. ;
OFF: Disables. ( 9)
BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables.
( 16)
CD READ 1: Automatically distinguishes between audio file disc
and music CD. ; 2: Forces to play as a music CD. No
sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels
(upgrading is not activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when
the unit is turned off. ; OFF: Cancels.

RADIO

Search for a station
1 Press repeatedly to select TUNER.
2 Press repeatedly (or press
FM2/ FM3/ AM/ SW1/ SW2.
Press S / T (or press S /
3
• To change the searching method for S / T: Press
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one of
the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
"– – – • –" (for FM), "– – – –" (for AM/ SW1) or "– – – – –" (for SW2) appears on the
display.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
automatically canceled.
/ on RC-406) to select FM1/
on RC-406) to search for a station.
repeatedly.
2
, Direct Access Tuning is
ENGLISH
5