Aux; Audio Settings - Kenwood KDC-U563BT Instruction Manual

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 5)
Start listening
1
Connect a portable audio player (commercially
available).
Auxiliary input jack
3.5 mm stereo mini plug with "L" shaped
connector (commercially available)
2 Press repeatedly to select AUX.
3
Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the
unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then press
the knob.
3
Turn the volume knob to select [AUX NAME SET], then
press the knob.
4 Turn the volume knob to make a selection, then press
the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5 Press and hold to exit.
To return to the previous setting item, press
16

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press
the knob.
4 Repeat step
5 Press and hold
(or using RC-406)
Portable audio player
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to make a selection, then press
2
To return to the previous setting item, press
SUB-W LEVEL
BASS LEVEL
MID LEVEL
TRE LEVEL
EQ PRO
BASS ADJUST BASS CTR FRQ
MID ADJUST
.
TRE ADJUST
3 until the desired item is selected or activated.
to exit.
–15 to +15 (0) Adjusts the subwoofer output level.
–8 to +8 (+6)
Adjusts the level to memorize for each source. (Before making an
–8 to +8 (+5)
adjustment, select the source you want to adjust.)
–8 to +8 (0)
60/ 80/ 100/ 200: Selects the center frequency.
BASS LEVEL –8 to +8 (+6): Adjusts the level.
BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
MID CTR FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL –8 to +8 (+5): Adjusts the level.
MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.
TRE CTR FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL –8 to +8 (0): Adjusts the level.
.
.
Default: XX