Accessories; Usb Operations - Clarion CZ209E Owner's Manual

6. ACCESSORIES

USB Operations

USB memory device operation
Note:
• The following operations are the same as CD
mode:
∗ Titles up to 64 bytes can be displayed in USB
mode.
∗ Pause
∗ Track selection
∗ Fast-forward/fast-reverse
∗ Scan play
∗ Repeat play
∗ Random play
∗ Folder selection
See "CD/MP3/WMA Operations" (page 12-14)
for details.
About USB memory
• USB stands for Universal Serial Bus, and
refers to an external bus standard supporting
data transfer rates of 12 Mbps.
• This unit is compatible with USB 1.1/2.0 with
maximum data transfer rates of 12 Mbps.
• USB memory devices playable via the unit's
USB cable are limited to those recognized as
"USB mass storage class devices"; operation
is not guaranteed with all USB memory
devices.
∗ Devices compatible with "USB Mass Storage
Class" can be used by connecting to the host
device without special drivers or application
software.
• Consult the manufacturer of your USB
memory device for information regarding
whether it is supported by "USB Mass
Storage Class" standards.
• Audio files playable on this unit are limited to
MP3/WMA files. For details, see "MP3/WMA"
(page 12).
Copy-protected WMA files cannot be played
on this unit.
• To prevent accidental loss of data, always
back up important data on your computer.
• Connections to a computer, or through a USB
hub device are not supported.
Downloaded from Caradio-Manual.com Manuals
16
CZ209E/CZ209ER/CZ209EG
• When a USB memory device is composed of
two or more drives, only one of the drives will
be detected.
• USB memory devices with security functions
are not supported.
• The order in which tracks are recorded may
differ depending on the USB memory device
(the actual playback order may not be the
same as that indicated on your computer's
display).
CAUTION
• Insert and remove a USB memory device
only when the device is not being
accessed. Connecting/disconnecting the
device at the following times may result in
the loss of data:
• If the USB memory device is removed or
power is disconnected during writing to
the device.
• When the device is subject to static
electricity or electric noise.
• Do not leave a USB memory device
unattended in an automobile. Exposure to
direct sunlight or high temperatures may
cause deformation or other malfunction of
the USB memory device.
Connecting a USB memory device
1. Connect the USB memory device to the USB
cable. Press the [SRC] button to switch the
source to the device.
Playback will begin from the first file
recorded on the device.
∗ Always insert the device fully into the
connector. Incomplete connections may
cause the device not to be recognized.
∗ Depending on the number of tracks recorded,
some of time may be required until all tracks
are read into the unit.
To listen to tracks on a connected
USB memory device
1. Press the [SRC] button to switch sources
When USB memory device is selected,
playback will begin from the location at which
playback was previously stopped.
∗ When a USB memory device is disconnected
and reconnected, playback will begin from the
previous track of the USB memory device.