Related Manuals for CYCLOPS PARALYSER 165
Summary of Contents for CYCLOPS PARALYSER 165
- Page 1 PARALYSER 165 USER INSTRUCTIONS CYCL PS Proudly designed and engineered in Australia by Dynamco Pty Ltd.
- Page 2 CYCLOPS PARALYSER 165 User Instructions Congratulations on having one of the world's most advanced and unique Australian designed and engineered vehicle security systems, installed in your vehicle! The Cyclops Paralyser 165 has been tested to and meets Australian Standards 4601:1999.
- Page 3 DISARMING To disarm the P165, simply insert and remove a valid Touchkey from the socket mounted on your dash. The red status LED will extinguish and the immobiliser is disarmed. If the engine is not started within 30-40 seconds the P165 will automatically arm.
- Page 4 OVERRIDE The system can be overridden by means of a Personal Identification Number (PIN). Every unit is supplied with its own PIN. It is important to make a note of this PIN or keep the card supplied with the unit in a safe p1ace as it also has the PIN detailed on it. ** Any digit marked '0', indicates 10 flashes.
- Page 5 Make sure that ignition switch is in the OFF position. Make sure the vehicle battery is not flat. Try your spare Touchkey. Use PIN to over-ride and contact you nearest Cyclops service centre. SPECIFICATIONS Manufactured by : Dynamco Pty Ltd Model Number : Paralyser 165 Standards met : AS/NZS 4601:1999.
- Page 6 ANNUAL INSPECTION Dynamco prides itself on the durability and integrity of its car security systems. We welcome users to contact a Cyclops service centre every twelve months for an annual inspection. (Please note a charge may be levied for this inspection)
- Page 7 The product has been altered or tampered with in any way or the serial number altered, defaced or removed. The defect has been caused by negligence by the owner or their agent. The product has not been operated correctly, installed by an authorised Cyclops installer or has been subjected to misuse or undue wear and tear.
-
Page 8: Warranty Registration
WARRANTY REGISTRATION CYCL PS PURCHASED FROM OWNER’S NAME TYPE OF VEHICLE VEHICLE REGO MODULE OF UNIT DATE OF INSTALL’ WARRANTY PERIOD : CONTROL MODULE TOUCHKEYS AFTER HOURS EMERGENCY PHONE...
Need help?
Do you have a question about the PARALYSER 165 and is the answer not in the manual?
Questions and answers
How can I disarm paralyser165 immobilizer without the pin and the key is not disarming it
If you do not have the PIN, try the following steps to disarm the CYCLOPS PARALYSER 165 immobilizer:
1. Ensure the ignition switch is in the OFF position.
2. Check that the vehicle battery is not flat.
3. Try using your spare Touchkey.
If the system still does not disarm, you must use the PIN override or contact the nearest Cyclops service centre for assistance.
This answer is automatically generated