Replacing The Camera - Lenovo S50 Maintenance Manual

Step 6. Remove the screw that secures the optical drive. Then slide the optical drive outward as shown to
disconnect it from the cable and slide it out of the optical drive bay.
Step 7. Install the new optical drive as follows:
a. Slide the new optical drive into the optical drive bay until the new optical drive is connected to
the cable and secured in place. Secure the new optical drive to the chassis with the screw.
b. Reattach the computer cover and the computer stand.

Replacing the camera

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the camera:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4. Remove the computer stand. Refer to "Removing the frame stand", "Removing the monitor stand",
or "Removing the transformer stand".
Step 5. Remove the rear cover. Refer to "Removing the rear cover".
34
Lenovo S50-30 All-In-One PC Hardware Maintenance Manual
1 2