Table of Contents
Advertisement
Removing the monitor stand
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the monitor stand
Step 1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4.
Remove the rubber block
the monitor stand. Then, lift the monitor stand up to remove it from the computer.
Step 5.
To reattach the monitor stand, insert the two tabs
slots in the chassis and slide the monitor stand in and down as shown.
1
that protects the screw
2
. Carefully loosen the screw
1
on the monitor stand into the corresponding
Chapter 8
2
that secures
29
.
Replacing hardware
Hide quick links:
Advertisement
Table of Contents
