Installation - JBL MR-145 Operation Manual

Installation

1. Precautions
Choose the mounting location carefully so that the unit will not interfere with the
normal driving functions of the boat.
Avoid installing the unit where it would be subject to high temperature (such as from
direct sunlight or hot air) or where it would be subject to dust, dirt or excessive
vibration. Use only the supplied mounting hardware for a safe and secure installation.
2. Mounting angle adjustment
Adjust the mounting angle to less than 20 degrees from the horizontal position.
3. Mounting example
<< Installation in the cabinet >>
1
Release Key
3
Bend these claws, if necessary.
Note Keep the release key in a safe place as you may need it in future to remove
the unit from the boat.
4
2
Half Sleeve
4
Tap
Controls (continued)
6. IEQ button(4)
The IEQ feature creates a realistic atmosphere for the style of music you select using
the latest digital sound technology.
Pressing this key repeatedly allows you to select from the following features :
- "FLAT" display - normal operation mode
- "CLASSICS" display - for the dramatic depth of classical music in an auditorium
- "POP" display - for the electric excitement of stadium pop
- "ROCK" display - for the subtle extension of the music's dimensions
- "DSP OFF" display - cancel the sound feature
7. TIME/FREQUENCY (T/F) button (15)
1) After your unit has been installed in the boat, turn power on. The radio frequency will
appear on the display.
2) Press T/F button once to display time mode.
Press T/F button once again (within 5 seconds) and hold until the displayed time begins
to blink.
3) Turn the spindle knob counter clockwise to set the minutes.
4) Turn the spindle knob clockwise to set the hour.
5) Once the adjustment is completed, press T/F button. The displayed time will stop
blinking and within 5 seconds will revert to radio frequency.
8.MUTE button (14)
Press MUTE button(14) to mute sound. Press again to restore volume to original setting.
9