Wiring Identification; Operating The Cd Player - JBL MR-145 Operation Manual

Wiring Identification

12P CONNECTOR
FUSE
BLUE
(AUTO ANT)
1A
FUSE
YELLOW
( BACK-UP B+ )
10A
BLACK
( GROUND )
RED
( IGNITION B+ )
WHITE
( FRONT LEFT )
WHITE/BLACK
GREEN
( REAR LEFT )
GREEN/BLACK
Installation Notes
(Applicable to both 2 and 4 speaker connection)
This radio contains four separate power amplifiers. To prevent possible damage
to these amplifiers please ensure the following:
i) The boat chassis is not used as a loudspeaker ground(-).
ii) Front and rear loudspeaker connecting wires are not joined together.
iii) Any wires not used when completing a two speaker installation are fully insulated.
Iv) The memory wire (yellow) is connected to a permanent + 12V supply.
v) The power wire (red) is connected via the ignition switch of the boat.
2
ANT. Socket
REMOTE
CONTROL
RED
Gray
(LINE OUT)
WHITE
GRAY
( FRONT RIGHT )
GRAY/BLACK
VIOLET
( REAR RIGHT )
VIOLET/BLACK

Operating the CD Player

5 2 16
COMPACT DISC PLAYER
MR-145
PWR
7 TUN
BD/LD
1
MUT MOD
14 6
3
1. Select the by pressing the
RADIO / CD / AUX
2. Track tuning (7)
Search the track on the DISC with
continuously, the track will fast forward or fast rewind.
3. Play / pause (8)
Push to pause and push again to resume play.
4. Intro Scan (9)
Press this button to hear the first 10 seconds of each track on the disc.
Press this button again to restore the player to its normal play mode.
5. Repeat Play button (10)
While playing a desired track, press the RPT button to play the track repeatedly.
Press the RPT button again to return to normal play mode.
6. Random play button (11)
Press the RDM button to play all tracks on a CD in random sequence.
Press the RDM button again to return the player to normal mode.
1
HI-POWER 4x45 Watts
T/F
2 2 3 4 5 6
INT INT RPT RDM IEQ
AUX
8 9 10 13 4
11 12
in sequence.
"MODE" button (3)
& buttons. If you press or button
15
11