Depaepe Telecom SecurAccess Compact User Manual page 33

SecurAccess Compact – User Guide
5. Repeat the operation for other settings choices or terminate by hanging up or by
entering 99 for immediate hanging up.
Example N°1: In the local programming mode, storing number 18 in Memory key 1 (without chain
dialing)
Settings
M1 storing for key 1
Keep depressed M1 (front panel button) and * (small keypad inside)
Release M1
Release * button
Enter
2 "beep" tones
Enter
2 "beep" tones
Enter
Enter
2 "beep" tones
Example N°2: : In the remote programming mode, change loudspeaker volume to "medium"
Settings
Loudspeaker volume
Calling the SecurAccess Compact using a Tone dialling telephone.
Dial
2 "beep" tones
Enter
2 "beep" tones
Enter
2 "beep" tones
Ente
2 "beep" tones
Enter
Enter
2 "beep" tones
Code Setting choice
2 0 Number (22 digits max.)
0000
20
18
*9
Code Setting choice
06 Low: 0 – Medium : 1 – High : 2
0XNNNNNNNN
*
0000
06
1
*9
2 "beep" tones: entering the programming mode
4 digits access code (0000: factory settings)
Confirming entering the programming mode
Setting code access
Confirming the entry
Number to store (18 in this example)
Confirming stored setting
Confirming the operation
Calling the SecurAccess Compact
The SecurAccess Compact answers and goes off-hook
Entering the programming mode
Confirming the entry
4 digits (Factory setting : 0000)
Confirming the entry
Setting code access
Confirming the entry
Setting choice (medium)
Confirming stored setting
Confirming the operation
Conf.
*9
Conf.
*9
33