Engine Oil Change - Honda WB20XT Owner's Manual

SERVICING YOUR PUMP

ENGINE OIL CHANGE

Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Place a suitable container below the engine to catch the used oil,
and then remove the oil filler cap/dipstick, drain plug and sealing
washer.
2. Allow the used oil to drain completely into an approved container,
then reinstall the drain plug with a new sealing washer, and tighten
it securely.
3. With the engine in a level position, fill to the edge of the oil filler
hole with the recommended oil (see page 33).
Engine oil capacities
WB20XT: 0.59 US qt (0.56 L)
WB30XT: 0.61 US qt (0.58 L)
Improper disposal of engine oil can be harmful to the environment. If
you change your own oil, please dispose of used motor oil properly.
Put it in a sealed container, and take it a recycling center. Do not
throw it in the trash, pour it on the ground, or pour it down a drain.
4. Screw in the oil filler cap/dipstick securely.
DRAIN PLUG
OIL FILLER CAP/DIPSTICK
32
SEALING WASHER
OIL LEVEL