Table of Contents
Advertisement
Carefully read the information in SDXC Memory Cards (0 33)
before performing the procedure using recordings made on an SDXC
memory card.
Operating modes:
Converting Scenes into Standard Definition
1 Power the camcorder using the compact power adapter.
2 Make sure there is a memory card in the camcorder with sufficient
available space.
3 Open the [Original], [Playlist] or [Video Snapshot] → [Original]/
[Playlist] index screen.
• Check that you have selected the f tab (built-in memory).
• [Original] or [Video Snapshot] → [Original] index screen: To convert all
the scenes recorded on a specific date, narrow down the scenes
shown to scenes recorded on that date (0 51).
4 Touch [a] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the
playlist of video snapshot scenes), you cannot select individual scenes;
instead, the entire playlist will be converted. Skip directly to step 6.
5 Touch on the individual scenes you want to convert.
• A checkmark O will appear on scenes selected. Touch a selected
scene again to remove the checkmark.
• To select all the scenes at once: Touch [Select All] instead of
touching individual scenes. (Remove in advance any checkmarks
from scenes you may have selected individually.)
6 Touch [Edit]
conversion screen.
• If a copyright notice appears, read it carefully and touch [OK] if you
agree.
• Touch [5] to change the conversion settings as described below.
7 Touch [Yes]
Touch [B] to interrupt the operation while it is in progress.
To embed the recording date and time
The recording date and time will always be displayed on the converted
scene.
Downloaded From VideoCamera-Manual.com Manuals
8
[Convert HDUSD (x DVD)] to open the HDUSD
8
[OK].
External Connections
131
Advertisement
Table of Contents
