Clarion FZ409E Owner's Manual page 30

Common Operations
Setting the code
Select "CODE".
3 - 1 .
Touch [ ] key to enter detail setting stage.
3 - 2 .
When no code is registered
Slide along [
3 - 3 .
key to adjust the value.
Touch [ ] / [
3 - 4 .
next digit.
During finish adjustment, touch [ ENT ] key
3 - 5 .
for 2 seconds to memory the new setting
value.
"MEMORY XXXX" will be displayed for 2 sec-
3 - 6 .
onds where "XXXX" is the entered digits.
Note:
White down your personal code in case you forget
it.
30
Downloaded from Caradio-Manual.com Manuals
FZ409E
] slider or touch [ ] / [
] key to set the previous or
When code is registered
Slide along [
3 - 3 .
key to input the registered code.
Touch [ ] / [
3 - 4 .
next digit.
During finish adjustment, touch [ ENT ] key for
]
3 - 5 .
2 seconds to confirm.
If successfully delete the registered code,
3 - 6 .
"DELETED" will be displayed for 2 seconds
and back to 1
If unsuccessfully delete the registered code,
3 - 7 .
"FAILED" will be displayed for 2 seconds and
back to the "INPUT 0000" display.
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns in the operation status indication area
of the display in a random order. You can turn
on or off this function. If the button operation is
performed with the screen saver function on, the
operation display corresponding to the button op-
eration is shown for about 30 seconds and the
display returns to the screen saver display.
∗ The factory default setting is "ON".
] slider or touch [
] key to set the previous or
item.
st
] / [ ]