Advertisement
MAINTENANCE
1. COLLECTION FILTER BAG REPLACEMENT
Remove the rear vacuum cabinet cover. Place collection filter in the col-
lection cabinet, while inserting the bag support fitting into the hole in the
collection filter bag and pushing the sa fety ring as far as it will go. If the col-
lection filter bag is not correctly positioned, the rear vacuum cabinet cover
will not close.
2. FOAM FILTER REPLACEMENT
Remove the foam filter support and replace it or clean it by tapping it gently
(the filter needs to be replaced about every 20 collection filter bags).
3. HEPA FILTER REPLACEMENT;
PREFILTER REPLACEMENT OR CLEANING
Depress the black clip (A) to release the ventilation grill and at the same
time slide out the grill (in the direction of the arrow) to free it. The prefilter
is located in the air outlet area under the Hepa filter. Replace or clean the
prefilter by washing it with water, then dry it and reinstall. Replace the Hepa
filter when dirty and reassemble the ventilation grill by sliding it until it
A
snaps into place.
8
Advertisement
