Fujitsu LIFEBOOK T935 Operating Manual page 76

Security functions
► Enter the PUK.

When the following appears:
• ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
► Enter the new PUK as follows.

Enter new PUK:
Confirm new PUK:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the PUK for every SmartCard,
and use an 8-digit number each time.
► Re-enter the new PUK to confirm.

When the following appears:
• PIN/PUK do not match = You have confirmed the PUK incorrectly. You will then
be requested to re-enter and reconfirm the new PUK.
F5,function key F10,functionkey F9,function key F8,function key F7,function key F6,function key
Instructions on how to initialise additional SmartCards can be found in Section
"Carrying out administrator functions", Page
► If you do not want to initialise any further SmartCards, press
SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances!
Keep the SmartCard and PIN/PUK in a safe place and protect
them from unauthorised access.
72
75.
Esc and remove the Admin
Fujitsu