Switching On The Device For The First Time - Fujitsu LIFEBOOK T935 Operating Manual

Switching on the device for the first time
Switchingon for thefirsttime
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
► Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OFF switch returns automatically to its original position.
► During installation, follow the instructions on screen.
Fujitsu
First-time setup of your device
1
17