Table of Contents
Advertisement
B
r
i
d
g
e
B
r
i
d
g
e
General page lets you set general channel for multi-VLAN. This page allows you to configure
VLAN settings under Bridge mode. Simply click the Bridge tab to open Bridge configuration
page.
Available settings are explained as follows:
Item
Enable Multi-VLAN
Setup
Enable
P1 to P4
SSID1 to SSID3
When you finish the configuration, please click OK to save and exit this page.
Description
Check this box to activate such setting.
Check this box to enable that channel. Only channel 3 to 8 can
be set in this page, for channel 1 to 2 are reserved for NAT
using.
It means the LAN port 1 to 4. Check the box to designate the
LAN port for channel 2 to 7.
Check the box to designate the SSID for channel 2 to 7.
56
VigorFly 210 Series User's Guide
Hide quick links:
Advertisement
Table of Contents
