Table of Contents
Advertisement
P
P
T
P
/
L
P
P
T
P
/
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Available parameters are listed below:
Item
L2TP Client Mode /
PPTP Client Mode
ISP Access Setup
PPP Setup
MTU
WAN IP Network
Settings
VigorFly 210 Series User's Guide
2
T
P
f
o
r
W
A
N
1
L
2
T
P
f
o
r
W
A
N
1
Description
Server IP - Type in the IP address of the PPTP/L2TP server.
User Name - Type in the username provided by ISP in this
field.
Password - Type in the password provided by ISP in this
field.
Redial Policy - If you want to connect to Internet all the
time, you can choose Always On. Otherwise, choose
Connect on Demand.
Idle Time - Set the timeout for breaking down the Internet
after passing through the time without any action. When you
choose Connect on Demand, you have to type value here.
It means Max Transmit Unit for packet. The default
setting is 1442.
Obtain an IP address automatically – Click this button to
obtain the IP address automatically.
Specify an IP address – Click this radio button to specify
some data.
IP Address – Type the IP address.
Subnet Mask – Type the subnet mask.
47
Hide quick links:
Advertisement
Table of Contents
