Table of Contents
Advertisement
RADIUS Server
Click the link of RADIUS Server to access into the following page for more settings.
Available settings are explained as follows:
Item
IP Address
Port
Shared Secret
Session Timeout
VigorFly 210 Series User's Guide
Disable - Disable IEEE 802.1X Pre-Authentication.
Guide you to access into next pop-up window to configure
RADIUS server settings.
Description
Enter the IP address of RADIUS server.
The UDP port number that the RADIUS server is using.
The default value is 1812, based on RFC 2138.
The RADIUS server and client share a secret that is used to
authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Set the maximum time of service provided before
re-authentication. Set to zero to perform another
authentication immediately after the first authentication has
successfully completed. (The unit is second.)
123
Hide quick links:
Advertisement
Table of Contents
