Turn the Auto Fill function off
▪
When you no longer need this function, press the
to turn the indicator off.
Looping sections
If you feel that a Fill or a Break should last longer than the recorded pattern,
you can put it in a cycling loop.
Set a Style Element to loop
▪
Press twice the button of the Fill or Break to put in loop.
The indicator on the button will start flashing, and the pattern will start re-
peating.
Exit from the loop
Do one of the following:
▪
Press the same Style Element button again, or
▪
Select a different Style Element.
Keep a Style Element looping while its button is pressed
▪
Keep a Fill or Break button pressed to loop it. Release it when you want the
Style Element to exit from the loop.
▪
If the
Auto Fill
the corresponding Fill. Release it when you want the Fill to exit from the loop,
and the Variation to start playing.
Fade In/Out
For greater effect, you can start and/or stop your playing with a smooth
fade-in or fade-out.
Fade in
▪
While the Accompaniment is not playing, press the
light up its indicator and start the Accompaniment with a smooth fade-in.
The Accompaniment will start. When the maximum volume is reached, the
indicator will turn off.
function is turned on, keep a Variation button pressed to loop
Playing the automatic accompaniment |67
AUTO FILL
button again
FADE IN/OUT
button to