Korg PA4X Quick Start Manual page 132

128| Connecting audio devices to the audio inputs
3 Go to the Global > Audio & Video > Audio In
Phantom Power
4 Press the MIC
phone input on.
5 Sing into the microphone to check the input.
Disconnect and turn off the microphone
When disconnecting a microphone from the XLR jack, the phantom power
is automatically turned off. Phantom power is also automatically turned off
each time you turn the Pa4X off.
As an alternative, you can go to the
and deselect the
Adjusting the microphone input gain
After connecting a microphone, you can adjust its input gain, mix level and
output level.
1 Be sure the MIC
indicators are turned off.
2 Use the GAIN
(from 20 to 55 dB). Check the level by watching at the
the control panel. Keep the level so that this indicator remains green most of
the time, with orange appearing at signal peaks. Never go to red.
checkbox.
button again, to turn its indicator on. This will turn the micro-
+48V Phantom Power
indicator is turned on. Be sure the
knob next to the MIC INPUT
page, and select the
Global > Audio & Video > Audio In
checkbox.
HARMONY
connector to adjust the input gain
+48V
page,
and DOUBLE
AUDIO IN indicator on