Table of Contents
Advertisement
M e n u
M e n u
M e n u
Hot dial:
When enabled, this function monitors the DTR-pin on the DATA port.
When the DTR-pin is pulled high by equipment connected to the
DATA port, a data call is automatically initiated to a pre-programmed
number. The number is automatically stored under short number 99.
9
Scroll down to
Hot Dial:
10
Setup opens the
Phone book editing
window.
Enter name, f.ex. "Hot".
Fill in required number,
and change provider
and network, if needed.
Initial mode:
The mode is set to AT modem as default.
With a PC running a terminal program connected to the WorldPhone
(f.ex. Windows HyperTerminal), the menu is displayed on the screen.
When selecting any of the MMI (Man Machine Interface) settings, the
PC screen automatically displays the WorldPhone picture.
11
Scroll down to Initial mode (step 9).
Pressing Selct
allows choosing
MMI interface:
12
Save stores the chosen settings.
WorldPhone – Chapter 2. Operation
Data/printer port setup cont'd
3 – Data/printer port setup
Bit rate:
9600 bps
Printer
: Disabled
AT modem: Disabled
Hot Dial:
Enabled
Initial mode: AT modem
470
SIM
Setup Enab Disab Save
Edit mode in Phone book
Name
:
Hot
Number : 004766779016
Net provider: Default Net
Terrestrial network: 00
Del
470
SIM
3 – Data/printer port setup
Bit rate:
9600 bps
AT modem
Printer
: Disabled
MMI (ASCII)
AT modem: Disabled
MMI (extended ANSI)
Hot Dial:
Enabled
MMI (multilingual)
Initial mode: AT modem
470
SIM
3 – Data/printer port setup
Bit rate:
9600 bps
Printer
: Disabled
AT modem: Disabled
Hot Dial:
Enabled
Initial mode: AT modem
470
SIM
Setup Enab Disab Save
Hot dial
´
Save
Initial mode
Selct
2.25
Advertisement
Table of Contents
