Appendix D – AT commands cont'd
Extended AT commands
AT & C
Default
AT & D
Default
AT & F ç
AT & S
Default
AT & V ç
AT & W ç
D-6
ç
[n]
determines the Data Carrier Detect (DCD) behaviour:
AT & C0 ç
AT & C1 ç
ç
[n]
selects the Data Terminal Ready (DTR) behaviour:
AT & D0 ç
DTR.
AT & D1 ç
Online Command Mode when DTR goes inactive.
AT & D2 ç
when DTR goes inactive.
resets the WorldPhone ASD to factory default. The
factory default is not saved as with the AT&W command,
so ATZ revokes to last saved values.
ç
[n]
selects the Data Set Ready (DSR) behaviour:
AT & S0 ç
AT & S1 ç
is established.
displays stored configuration profile.
saves active configuration profile.
(May be recalled using
WorldPhone – Chapter 5. Appendices
sets DCD always ON.
sets DCD, only when connected.
the WorldPhone ASD ignores
the WorldPhone ASD enters
the WorldPhone ASD clears call
sets DSR permanently ON.
sets DSR ON when satellite link
AT Z ç
).