Table of Contents
Advertisement
Appendix B – Installation of Voyager Antenna cont'd
Mounting on magnetic-holding surface
The Antenna Unit may be attached to the roof top with a magnetic plate inside
the antenna mounting bracket. On a flat, clean metal surface the antenna will
stay in place at highway speeds up to 150 km/hour.
Note! A protection plate is supplied to keep the magnetic plate clean during
shipment of the equipment. Remove the protection plate from the magnetic plate
prior to attaching the Antenna Unit.
See
"Assembling the Antenna Unit for magnetic
The antenna may be loosened by carefully bending a screwdriver as indicated.
Mounting on load carrier
The Antenna Unit may also be attached to the roof using load carrier as indi-
cated. See
"Assembling the Antenna Unit for load carrier
Antenna coax cable
WorldPhone – Chapter 5. Appendices
mount".
Antenna Unit
mounted on
load carrier
Antenna Unit
attached with
magnetic plate
mount".
Power cable
with 10A fuse
Telephone Unit &
Power Supply
B-11
Advertisement
Table of Contents
