Magellan GLOBAL SATELLITE TELEPHONE User Manual page 20

WorldPhone Marine cont'd
Setting up
1
Insert the SIM card (if SIM operated):
2
Switch ON
the power supply:
3
Press and hold the
telephone ON/OFF
key for 2 seconds:
The display should light up.
4
a
Enter the SIM
PIN code, and
press Ok:
Adjust display
brightness:
4
b
If no SIM card is inserted, the
"Phone PIN" will be prompted for.
5
A shaded signal strength bar will appear in the display.
The longer the signal bar or higher the signal strength indicator value,
the better the signal quality. The bar becomes solid when the signal
strength value reaches 400.
The maximum marker indicates the highest signal strength achieved
during the current search.
Maximum marker
Low high signal strength
Signal strength indication
6
Pressing Ok initializes the system with the displayed satellite.
1.14
ON/OFF
WorldPhone
SIM PIN:
Press "Help" for an introduction.
470 DC
When selecting another display language,
Eng appears for easy restoring of English,
see "Phone setup: Language setup and
Language reset" in chapter 2. Operation.
Satellite search
Found AOR-E. Accept this satellite?
470 DC SIM
WorldPhone – Chapter 1. Getting Started
Del Eng Ok
Tone Seek New Ok