Maintenance - Remington EURO 8000 Use & Care Manual

Table of Contents

Advertisement

ADD VOLUME TO YOUR HAIR USING A DIFFUSER
To add volume to your hair, tilt your head upside down and dry so that the
roots fall away from your scalp. Use the diffuser with the hair dryer set at
a low heat and low speed. Point the hairdryer at the roots to give your hair
maximum volume. Continue the process to the ends of your hair
Note: Always select the lowest heat setting when using the diffuser,
as damage may occur to the diffuser if higher heat settings are used.
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle 'OFF' if the
temperature exceeds the comfort level due to partially blocked air inlet
or outlet openings. In the event that the hair dryer stops during use turn
off all switches and allow the hair dryer to cool down, at which time the
thermostat will automatically reset. Before using again, check that the air
inlet and air outlet openings are not blocked. Unplug the hair dryer and
clean the openings if necessary. During use, do not block the air openings
or let your hair be drawn into the hair dryer.

MAINTENANCE

Your hair dryer is designed for household use and is virtually maintenance
free. When cleaning becomes necessary, turn all switches off and
disconnect the hair dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet
grille and filter at the back of the dryer. To access the air inlet grille and
filter, grasp the air inlet grille retaining ring with your hand and twist it anti-
clockwise until it unlocks. Pull it away from the hair dryer. The filter can now
be removed and cleaned with a soft brush or a vacuum cleaner. Replace the
filter. Take the air inlet grille retaining ring and position it so the lugs on the
ring are aligned with the notches on the side of the dryer. To lock, turn the
air inlet grille retaining ring clockwise. The exterior of the hair dryer can be
cleaned by wiping it with a damp cloth.
7

Advertisement

Table of Contents
loading

Table of Contents