Advertisement
USER INSTRUCTIONS
This hair dryer is equipped with a thermostat that will cycle `OFF' if the
temperature exceeds the comfort level due to partially blocked air inlet
or air outlet grilles. In the event that the hair dryer stops during use, turn
off all switches and allow the hair dryer to cool down, at which time the
thermostat will automatically reset. Before using again, check that the air
inlet and air outlet grilles are not blocked.
Unplug the hair dryer and clean the openings if necessary. During use, do
not block the air openings or let your hair be drawn into the hair dryer.
MAINTENANCE
Your hair dryer is designed for household use and is virtually maintenance free.
When cleaning becomes necessary, turn all switches off and disconnect the hair
dryer from the power outlet.
To maintain peak product performance, it is important to clean the air inlet grille
and filter at the back of the dryer. To access the air inlet grille and filter, grasp
the air inlet grille retaining ring with your hand and twist it anti-clockwise until
it unlocks. Pull it away from the hair dryer. The filter can now be cleaned with
a soft brush or a vacuum cleaner. Take the air inlet grille retaining ring and
position it so the lugs on the ring are aligned with the notches on the side of the
dryer. To lock, turn the air inlet grille retaining ring clockwise. The exterior of the
hair dryer can be cleaned by wiping it with a damp cloth.
STORAGE
When not in use, unplug the unit. Allow appliance to cool and store out of reach
of children in a safe, dry location. Never wrap the cord around the appliance as
this will cause the cord to wear prematurely and break. Handle cord carefully for
long life and avoid jerking, twisting or straining especially at plug connections. If
the cord becomes twisted in use, periodically straighten it.
You may also use the hang loop to store the hair dryer within convenient reach,
ensuring that water cannot be splashed on to it when it is hung up.
7
Advertisement
