Main Beam Headlamps - PEUGEOT 508 Handbook

Sidelamps
(halogen model)
Remove the protective plastic cover by
pulling on the tab.
Unclip the bulb holder.
Remove the bulb by pulling it out and
change it.
For reassembly, carry out these operations in
reverse order.

Main beam headlamps

(halogen model)
Remove the protective plastic cover by
pulling on the tab.
Disconnect the bulb connector.
Remove the bulb by pulling it out and
change it.
For reassembly, carry out these operations in
reverse order.
Practical information
Dipped and main beam
i
headlamps (xenon model)
D1S xenon bulbs must be changed
by a PEUGEOT dealer or a qualified
workshop, as there is a risk of
electrocution.
It is recommended that the D1S bulbs
are changed at the same time when one
of them fails.
Daytime running lamps
(xenon model)
For the replacement of these
light-emitting diode (LED) lamps,
contact a PEUGEOT dealer or
a qualified workshop.
8
189