PEUGEOT 508 Handbook page 190

Practical information
The headlamps are fitted with
!
polycarbonate glass with a protective
coating:
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
use a sponge and soapy water,
when using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
Do not touch the bulb directly with
your fingers, use lint-free cloths.
Changing a bulb should only be done
after the headlamp has been switched
off for a few minutes (risk of serious
burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order not
to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
188
Risk of electrocution
!
Xenon bulbs (D1S-35W) must be
replaced by a PEUGEOT dealer or
a qualified workshop.
Dipped beam headlamps
(halogen model)
Remove the protective plastic cover by
pulling on the tab.
Disconnect the bulb connector.
Extract the bulb by pulling and change it.
For reassembly, carry out these operations in
reverse order.