Table of Contents
Advertisement
3. Connect the power adapter to the FaxLync device ("12 VDC"), and then to
a standard electrical wall outlet (120V).
4. A series of status LED lights are located on the front of the FaxLync device.
After the device is plugged in to a power source, a green, Power LED will
light as soon as it is powered up.
5. When the initialization process completes (~60 seconds), the Status LED
will change from red to green. When the Power, Status, and WAN lights
all turn to solid green, the physical installation of the FaxLync device is
complete. Congratulations! You are now ready to send and receive faxes
from your FaxLync-enabled fax machine, or MFP.
As of April 24, 2014 FaxLync is experiencing compatibility issues with inbound
faxing on Xerox WorkCentre 7000 and 3000 series. Users can use FaxLync to send
outbound pages through these Xerox devices, but not receive inbound deliveries.
Concord Fax is actively working with the underlying hardware vendor to correct
this problem and will issue an update once a resolution has been confirmed. Users
still have the option to receive inbound faxes as emails, or use a FaxAssist utility to
deliver the inbound fax as a print job to the Xerox.
Concord Fax Online FaxLync User Guide :: www.concordfax.com :: sales@concordfax.com :: (888) 271-0653
7
•
Advertisement
Table of Contents
