C hec ki ng th e Fa xLyn c fir mwa re
1. Connect a laptop to the LAN port of the unit and then go to the unit's web
2. Login with User: admin / Password: admin
3. To check the firmware version you would need to go to Advanced /
4. If the build version on your unit is not the version listed, enter this URL in
5. Click Apply
6. Click Force Upgrade. After the applying the upgrade, the FaxLync device
7. Then go to Advanced / Restore Defaults, and answer Yes to the question,
*Note: this takes 2 to 5 minutes to update with Concord servers.
M anu al l y Re settin g th e Fa xLync D evice
S
hould your device become unresponsive, Concord support may
advise you to reset your FaxLync device. In order to do this, you will
need access to the FaxLync device, the power adaptor, and have a
paper-clip (or something similar), in order to access the reset button on the
back of the FaxLync device.
Concord Fax Online FaxLync User Guide :: www.concordfax.com :: sales@concordfax.com :: (888) 271-0653
interface at (http://192.168.2.1)
MP20X Firmware Upgrade. The current version should be 2.6.4_p041_
build_9
the box after "Check every 24 hours at URL, http://faxlync.concordfax.
com/storage/firmware/MP20x.rmt
will reboot.
"do you want to make these changes?"*
13
•