Troubleshooting; Resetting The Device; Clearing User Data; Getting More Information - Garmin Edge 810 Quick Start Manual

2
Use a coin to twist the cover counter-clockwise until it is
loose enough to remove (the arrow points to unlocked).
3
Remove the cover and the battery
4
Wait 30 seconds.
5 Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
6 Use a coin to twist the cover clockwise back into place (the
arrow points to locked).
After you replace the GSC 10 battery, you must pair the GSC
10 with the device again.

Troubleshooting

Resetting the Device

If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
1
Hold for 10 seconds.
2 Hold for one second to turn on the device.

Clearing User Data

You can restore all of the device settings to the factory default
values.
NOTE: This deletes all user-entered information, but it does not
delete your history.
1
Turn off the device.
2
Place your finger on the top left corner of the touchscreen.
3
While holding your finger on the touchscreen, turn on the
device.
4
Select .

Maximizing Battery Life

• Decrease the backlight
• Shorten the backlight timeout
• Select the Smart recording interval
• Turn on the Auto Power Down feature
• Turn off the Bluetooth wireless feature

Decreasing the Backlight

1
Select to open the status page.
2
Use and to adjust the brightness.

Adjusting the Backlight Timeout

You can decrease the backlight timeout to maximize the battery
life.
1
Select > Backlight Timeout.
2
Select an option.
14
.
(page 14).
(page 14).
(page 12).
(page 14).
(page 11).

Using the Auto Power Down Feature

This feature automatically turns off the device after 15 minutes
of inactivity.
1
Select > System > Auto Power Down.
2
Select On.

Calibrating the Touchscreen

1
From the home screen, select
Calibrate Screen.
2
Follow the on-screen instructions.

Locking the Touchscreen

You can lock the screen to prevent inadvertent screen touches.
1
Select .
2
Select .
Unlocking the Touchscreen
1
Select .
2 Select .

Getting More Information

You can find more information about this product on the Garmin
website.
• Go to www.garmin.com/intosports.
• Go to www.garmin.com/learningcenter.
• Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.

Temperature Readings

The device may display temperature readings that are higher
than the actual air temperature if the device is placed in direct
sunlight, held in your hand, or is charging with an external
battery pack. Also, the device will take some time to adjust to
significant changes in temperature.

Viewing Device Information

You can view the unit ID, software version, and license
agreement.
From the home screen, select
Appendix

Registering Your Device

Help us better support you by completing our online registration
today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.

Data Fields

Some data fields require ANT+ accessories to display data.
Balance: The current left/right power balance.
Balance - 10s Avg.: The 10-second moving average of left/right
power balance.
Balance - 30s Avg.: The 30-second moving average of left/right
power balance.
Balance - 3s Avg.: The three-second moving average of left/
right power balance.
Balance - Avg.: The average left/right power balance for the
current activity.
> System > Display >
> System > About.
Troubleshooting