Sharp AQUOS Xx User Manual page 104

102
Connecting Using AOSS
In Wi-Fi settings, on Action Bar
AOSS Follow onscreen prompts
Connecting Using WPS
In Wi-Fi settings, on Action Bar
WPS Push Button Follow onscreen prompts
・Available when Wi-Fi is enabled.
・ To connect using the PIN method, in Wi-Fi settings,
Action Bar Easy Settings
follow onscreen prompts.
Troubleshooting
Q. Cannot detect access points
A. There may be multiple access points using neighboring
channels. In this instance, handset may not detect
access points correctly.
Disconnecting Wi-Fi
In app sheet, (Settings)
Wi-Fi settings appear.
Tap connected access point
Wi-Fi is disconnected.
・Password entry may be required to reconnect to access
point.
Easy Settings
Easy Settings
on
WPS Pin Entry , then
Wi-Fi settings
DISCONNECT
Using Wi-Fi Direct
Use Wi-Fi Direct to establish a Wi-Fi connection with other
Wi-Fi Direct compatible devices with no need for an access
point or Internet connection.
・Enable handset Wi-Fi first.
In app sheet, (Settings)
Wi-Fi settings appear.
on Action Bar Advanced
Found Wi-Fi Direct compatible devices appear in Peer
devices field.
・ If target device does not appear, Tap
DEVICES to try searching again.
Tap target device Follow onscreen prompts for
authentication
Handset connects to the device.
・A connection request will be canceled if not accepted within
a certain period of time.
・ To disconnect devices, Tap one then Tap
Wi-Fi settings
Wi-Fi Direct
SEARCH FOR
OK .