Digital Tv - Panasonic TX-40CS520E Ehelp

Digital TV

Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial.
●
Check Signal Condition. If the level of
●
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (Set top box,
DVD, etc.).
Watching > Tuning and editing channels > Signal Condition
Watching > Basic > Basic connection
Weather conditions affect signal reception (heavy rain, snow, etc.), in
●
particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
●
signals may be relatively low in some cases, despite good reception of
analogue channels.
Check the network connections and settings (DVB-via-IP).
●
Functions > DVB-via-IP
Network > Network settings
Turn the TV off with Mains Power On / Off switch, then turn it on again.
●
No programmes shown on
Adjust the direction of the aerial to another transmitter installed nearby.
●
Signal Quality
TV Guide
- 247 -
is low, the DVB