Auto Update - Panasonic TX-40CS520E Ehelp

Auto update

You can update new software automatically.
1. Display the menu with MENU.
2. Select Setup > System Menu
Standby and press
3. Select the time and press
If any software updates are available, a notification message will appear.
●
To install new software, select
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
If System Update is performed, the software will be updated (TV functions
●
may be changed). If you do not want to do so, set
Standby to Off.
The automatic updating cannot be performed in the following conditions:
●
– TV turned off with Mains Power On / Off switch
– DVB-via-IP
= Note =
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.
●
A notification message may be a reminder. In this case, schedule
●
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
> System Update
OK to access.
OK to set.
Standby
- 195 -
> Auto Update Search in
/ Now and press OK
Auto Update Search in
to set.