Using Common Interface - Panasonic TX-40CS520E Ehelp

Using Common Interface

The Common Interface Module menu provides access to software contained
in Common Interface (CI) Modules.
This function may not be available in some countries or regions.
●
Video and audio signals may not be output depending on the broadcast or
●
service.
Although CI module may enable you to view some services, this TV does not
guarantee all services (e.g. encrypted pay-TV channels). Please use only the
broadcaster-approved CI module. Consult the operator / broadcaster or CI
module manufacturer for more information and conditions of the services.
■
Insert the CI module (optional)
Normally encrypted channels will appear. (Viewable channels and their
●
features depend on the CI module.) If encrypted channels do not appear,
take the following steps.
For details, read the manual of the CI module, or check with the content
●
provider.
1. Select the mode with TV.
DVB-C / DVB-T
2. Display the menu with MENU.
3. Select Setup > Common Interface
4. Select Slot 1:, press
On-screen instructions may not correspond to the remote control buttons.
●
and press
OK and follow the on-screen instructions.
- 192 -
OK to access.