Digital Tv - Panasonic TX-40AX630B Manual

Is Contrast, Brightness
●
Watching > For best picture > Basic settings
Check all required cables and connections are firmly in place.
●
Blurry or distorted image (no sound or low volume)
Reset channels.
●
Watching > Tuning and editing channels > Auto Setup
There may be red, blue, green and black spots on the screen
This is a characteristic of liquid crystal panels and is not a problem. The
●
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black. Please note this
does not affect the performance of the panel.

Digital TV

Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
Block noise, frozen or disappearing image occurs / Some channels cannot be
tuned
Check the position, direction and connection of the aerial.
●
Check Signal Condition. If the level of
●
signal is weak. Connecting the aerial to the TV directly may improve signal
quality than connecting the aerial through the equipment (Set top box,
DVD, etc.).
Watching > Tuning and editing channels > Signal Condition
Watching > Basic > Basic connection
Weather conditions will affect signal reception (heavy rain, snow, etc.),
●
in particular in poor reception areas. Even during good weather, the high
pressure can cause poor reception of some channels.
Due to the digital reception technologies involved, quality of the digital
●
signals may be relatively low in some cases, despite good reception of
analogue channels.
or Colour in the Picture Menu set to the minimum?
Signal Quality
- 210 -
is low, the DVB